[ Pobierz całość w formacie PDF ]
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 01
www.cobra.it
NISSAN
MOD.
MICRA*
YEAR.
01
fi
PETROL
DIESEL
X
MAKE
* Models with original equipment keyless entry system.
ALARM/SIREN
POSITION
Position the compact alarms and the sirens in the engine compartment. Pass the
cables using the original core hitch located in the bulkhead that divides the engine
compartment and the passenger’s compartment, near the front window.
CENTRAL UNIT POSITION
Position the modular systems and the modules under the dashboard, driver’s side.
POWER SUPPLY
+ 30:
connect to the 2 mm
2
WHITE/GREEN wire located in the wiring harness coming
out of the TLC operating central placed under the dashboard, driver’s side
- 31:
connect directly to the 2 mm
2
BLACK wire located in the wiring harness coming
out of the TLC operating central placed under the dashboard, driver’s side.
IGNITION WIRE
+ 15/54:
connect to the 2 mm
2
WHITE/RED wire located in the wiring harness coming
out of the TLC operating central placed under the dashboard, driver’s side.
DIRECTION INDICATORS
Connect to the GREEN/YELLOW wire with SILVER reference and to the
GREEN/BLACK wire with SILVER reference located in the wiring harness coming out
of the TLC operating central placed under the dashboard, driver’s side.
ELECTRIC WINDOWS
Positive control signal
Front window, driver’s side:
cut the RED/BLUE wire.
Front window, passenger’s side:
cut the BLUE/RED wire
Connections must be done in the wiring harness coming out of the correspondent
control switch.
ACTIVAT./DEACTIVATION
CONTROLS
Connections antitheft/vehicle
38XX Vehicle Position
GREY/BLACK ground car body
YELLOW/BLACK ground car body
VIOLET/WHITE ground car body
ORANGE GREEN/YELLOW (BLK) coming out TLC central
VIOLET GREEN/BLACK (BLK) coming out TLC central
ORANGE/WHITE ground car body
Connections must be done directly in the connector coming out of the TLC central
located on the left of the central doors locking unit on the side of the steering column,
driver’s side. Refer to
diagram nr. 125.
IMMOBILISATION POINT
Fuel pump
Cut the BLACK/RED wire with SILVER reference located in the wiring harness behind
the sill cover, driver’s side.
STARTER CUT OFF
+ 50:
Cut the BLACK/RED wire located in the wiring harness coming out of the grey
connector, placed near the core hitch, on the coming out of the driver’s side door.
BONNET SWITCH
Install an additional switch on the front headlamp support plate, driver’s side.
DOORS SWITCH
Connect to the RED/GREEN wire located in the wiring harness coming out of the TLC
operating central placed under the dashboard, driver’s side.
BOOT SWITCH
Connect to the RED/BLUE wire located in the wiring harness coming out of the
connector of the boot lamp
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
nimic01gbbtr1.doc
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 01
www.cobra.it
FITTING DIAGRAM N° 125
To make the connection of Art. 3800 on
NISSAN MICRA
Central doors locking unit
ART.3800
GREEN/YELLOW GREEN/BLACK
VIOLET
ORANGE
DIODES 1N5406
YE
YELLOW
YELLOW
ORANGE/WHITE
VIOLET/WHITE
GREY/BLACK
YELLOW/BLACK
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
nimic01gbbtr1.doc
[ Pobierz całość w formacie PDF ]