[ Pobierz całość w formacie PDF ]
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
MAKE
NISSAN
MOD.
TINO
YEAR.
01
fi
PETROL
DIESEL
X
ALARM/SIREN
POSITION
Position the compact alarms and the sirens in the engine compartment, behind the
passenger’s side headlamp.
CENTRAL UNIT POSITION
The modular systems and the modules should be positioned under the driver’s side
dashboard.
POWER SUPPLY
+30:
connect to the WHITE wire located in the 2 way black connector, in the fuse box.
-31:
connect to one of the ground terminals located behind the driver’s side panel.
IGNITION WIRE
+15/54:
Connect to the BLACK/RED wire located in the 6 way white connector, in the
fuse box.
DIRECTION INDICATORS
Connect to the GREEN/BLACK wire, at the position nr. 15, and to the
GREEN/YELLOW wire, at the position nr. 11, in the 16 way white connector, in the
central located under the driver’s side dashboard, on the side of the steering column.
ELECTRIC WINDOWS
Positive control signal
Front window, driver’s side:
cut the the GREEN/RED wire, in the 16 poles white connector, in the serial switches
panel, in the driver’s side door.
Front window, passenger’s side:
cut the RED/WHITE wire in the wiring harness coming out of the driver’s side door.
Rear window, driver’s side:
Cut the YELLOW wire in the wiring harness coming out of the driver’s side door.
Rear window, passenger’s side:
cut the GREEN/WHITE wire in the wiring harness coming out of the driver’s side door.
CENTRAL DOORS LOCKING Negative control signal
Connect to the light GREEN/RED wire (lock) and to the GREEN wire (unlock), in the 20
way white connector, located in the central placed under the driver’s side dashboard,
on the side of the steering column.
IMMOBILISATION POINT
Gasoil pump
Cut the BROWN wire with SILVER references located in the wiring harness coming
out of the 16 way white connector, in the fuse box, under the driver’s side dashboard.
STARTER
+50:
Cut the BLACK/WHITE wire located in the wiring harness coming out of the
connector of the ignition key.
BONNET SWITCH
Install an additional switch on the front headlamp support grill, driver’s side.
DOORS SWITCH
Connect to the RED/WHITE wire, at the position nr. 7, in the 16 way white connector, in
the central placed under the driver’s side dashboard, towards the steering column.
BOOT SWITCH
Connect to the RED/WHITE wire coming out of the boot lamp.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
nitin01gbd.doc
[ Pobierz całość w formacie PDF ]