[ Pobierz całość w formacie PDF ]
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
NISSAN
MOD.
KING-CAB
YEAR
97
fi
PETROL
DIESEL
X
MAKE
ALARM/SIREN
POSITION
Position the compact alarms and the sirens in the engine
compartment, on the wheel housing, driver’s side. Position the
modular systems and the modules under the dashboard, driver’s side.
Pass the cables through the core hitch located on the bulkhead that
divides the engine compartment and the passenger’s compartment,
passenger’s side.
POWER SUPPLY
+ 30:
connect to the general supply wiring at the entrance of the fuse
box.
- 31:
connect to the car body.
IGNITION WIRE
+ 15/54:
connect to the 1 mm
2
ORANGE wire with SILVER references
in the wiring harness located above the fuse box, under the left
dashboard, driver’s side.
DIRECTION INDICATORS
Connect to the 1 mm
2
GREY/LIGHT BLUE wire with SILVER
references and to the GREY/RED wire with SILVER references located
in the wiring harness above the fuse box, under the left lateral
dashboard, driver’s side.
ELECTRIC WINDOWS
Not foreseen as original equipment.
CENTRAL DOORS LOCKING
Not foreseen as original equipment.
IMMOBILISATION POINT
Fuel pump
Cut the WHITE/BLUE wire with SILVER references coming out of the
15 amp. fuse, in the fuse box.
STARTER
+50:
Cut the BLACK/GREEN wire located in the wiring harness coming
out of the 5 way transparent connector fixed along the steering
column.
BONNET SWITCH
Install an additional switch along the left bonnet doorstop.
DOORS SWITCH
Connect to the 1 mm
2
RED/BLACK wire with SILVER references
located in the wiring harness behind the left lateral panel, driver’s side.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
nikin97gbb.doc
[ Pobierz całość w formacie PDF ]