[ Pobierz całość w formacie PDF ]
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
MAKE
NISSAN
MOD.
PATROL
YEAR
02
fi
PETROL
DIESEL
X
ALARM/SIREN
POSITION
Position the compact alarms and the sirens on the wheelhouse,
driver’s side.
CENTRAL UNIT POSITION
Position the modular systems and the modules under the dashboard,
driver’s side.
POWER SUPPLY
+30:
connect to the RED wire, in the 2 way connector located behind
the fuse box.
- 31:
connect directly to the car body.
IGNITION WIRE
+15/54:
connect to the BLACK/YELLOW wire, in the 6 way connector,
near the direction indicators switch.
DIRECTION INDICATORS
Connect to the GREEN/RED and GREEN/YELLOW wire, in the 8 way
brown connector, located in the upper part, behind the passenger’s
side glove compartment.
ELECTRIC WINDOWS
Positive control signal
Front window, driver’s side
Cut the BLUE/RED wire, in the 16 way white connector, in the push
button panel, driver’s side.
Front window, passenger’s side
Cut the BLUE/YELLOW wire, in the wiring harness coming out of the
driver’s side door.
CENTRAL DOORS LOCKING Negative control signal
Connect to the RED/YELLOW wire, at the position nr.3 (lock) and to
the YELLOW/GREEN wire at the position nr. 2 (unlock), in the 20 way
grey connector located on the central locking unit, behind the driver’s
side sill cover.
IMMOBILISATION POINT
Gasoil pump
Cut the BROWN wire located behind the fuse box.
STARTER
+50:
Cut the BLACK/WHITE wire located in the 6 way connector near
the direction indicators switch.
BONNET SWITCH
Install an additional switch on the front headlamp support plate, driver’s
side.
DOORS AND HATCH SWITCH
Connect to the RED/BLACK wire, at the position nr.16, in the 20 way
grey connector located on the central locking unit, behind the driver’s
side sill cover.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
nipat02gbd.doc
[ Pobierz całość w formacie PDF ]